Belt Pulley Wanted and Details

Kendog · Mar 12, 2013

Hi all. I'm on the hunt for a what I believe to be a MM Belt Pulley like was recently listed on fleaBay.

It was advertised to be a MM JT-R Jet Star pulley, with 6" surface x 12" diameter x 1 1/4" shaft hole, but I'm not sure. I do want one with the 2-half design as shown, but would prefer smaller that 12" diameter.

First off, if anyone can confirm what this sample is from, then I can look for it accurately. Thank you.

Sample Pict:

molinegb · Mar 12, 2013

The early belt pulleys were all two piece and clamped to shaft. Later models had a hub on belt pulley shaft. The pulley was then bolted to hub. J JT302,Z JT302A,KT-MT KT 312,FT-GT-21-32 FT47A,R 12 1/4" x 6" YT 327(10B9)(11B9), U UT304
Just by looking at picture it is a Z pulley. Pre 1948. I don't think R used split pulley.

Heath72 · Mar 12, 2013

This is a 12" pulley correct for an R up until about 1947. 1948 and later used a one-piece pulley that bolts up to a small hub with four bolts. The R is the only tractor that used the 12" pulley. Z's and U's used 15" and 16" pulleys.

m-m john · Mar 12, 2013

i have the exact same pulley. I use it on a Z to run a sheller. But pretty shure it will also fit an R

Kendog · Mar 12, 2013

Thank you for the quick replies.

Was there a split pulley with a smaller diameter, and does anybody have one of either to sell?

Thank you.

Anonymous-0 · Mar 14, 2013

Hello I have multiple pulleys 12"-15" pulleys along with many other minneapolis parts, Need help on a price for a ZAE tractor will be for sale shortly. and I will be doing plenty of research in the future before I sell it. Thanks

molinegb · Mar 14, 2013

R cab used a smaller diameter pulley maybe 10" to clear cab.

Belt Pulley Wanted and Details

Kendog

Member

molinegb

Well-known Member

Heath72

Member

m-m john

Member

Kendog

Member

Anonymous-0

Well-known Member

molinegb

Well-known Member

Similar threads