Moline DF plow

jnf · Mar 5, 2013

I have acquired a Minneapolis Moline DF four bottom plow. Anyone know a source of moldboards, landslides, and shares. Mine are a one piece share and the moldboards do not have replaceable shins.

Alan K · Mar 5, 2013

That might be a tough one. I have made one landslide for myself and repaired a moldboard that was wearing out, but I dont plow alot of acres with mine either. I may have some shares to sell, was planning on downsizing my older plow parts. I will have to look through them to see what I have.

Grampajohn · Mar 5, 2013

Do you have numbers off of your old parts?

I think I have new shares.

gramps

DEAN ZINGRE · Mar 6, 2013

If your plow has "cy" bottoms, I have a new cy-16 moldboard that I will let go of. The cy bottoms had no shins as you describe. E-Mail if you have questions. --Dean--

jnf · Mar 6, 2013

I am not having good results getting wear items for this plow. Maybe a dead end ahead. My shares are actually quite good, but it desperately needs moldboards and land slides. I appreciate the offer of one moldboard, but it takes 4 to get to a worthwhile ending. The part # on the moldboard is Acme Steel DW 16. I can't make anything out on the landslide. If you can help my number is 660-322-1045.

brian koeman · Mar 9, 2013

i have a 3 and 4 bottom trailer plow with two pace shares,,,where can i get new ???
spoke wheels

Alan K · Mar 9, 2013

I will take a look at what I have. My email is open....

jnf · Mar 9, 2013

Call Carter Barker in Pratt, Kansas. He had new moldboards believe it or not! Maybe he can help you with shares. 620-672-2490 Good luck. I know parts for these old plows is a real treasure hunt.

Moline DF plow

jnf

Member

Alan K

Well-known Member

Grampajohn

Member

DEAN ZINGRE

Member

jnf

Member

brian koeman

Member

Alan K

Well-known Member

jnf

Member

Similar threads