Author	[Modern View]
pplowboy 03-04-2013 15:17:57 70.198.193.97 Report to Moderator	Got a 504 injector, copper wash,, wont seal up,,,surface is ruff an pitted,,, anyone now of the tool recut it,, clean it up without pullin , the head, i would think something like a end mill bit,might work,,,jus wonderin ,what other.deisel guys have tryed,,,,thanks for the input [Reply]   [No Email]
joho 03-06-2013 02:55:45 71.63.36.150 Report to Moderator	Re: gettin a inject, washer sealed up in reply to pplowboy, 03-04-2013 15:17:57   The 504 in my '66 G1000 used an asbestos fiber sealing ring instead of the copper washer. [Reply]  [No Email]
Oliver662011 03-04-2013 19:49:03 98.31.23.236 Report to Moderator	Re: gettin a inject, washer sealed up in reply to mm585, 03-04-2013 15:17:57   Quoting Removed, click Modern View to see Any idea where to get one? Mike [Reply]  [No Email]
mightymolinekid 03-05-2013 15:20:32 166.182.3.179 Report to Moderator	Re: gettin a inject, washer sealed up in reply to Oliver662011, 03-04-2013 19:49:03   I got some from my local AGCO dealer...they used to be a MM dealership back in the day. I also got some from the pump shop when they did my fuel system. [Reply]  [No Email]
pplowboy 03-04-2013 18:36:45 70.198.193.97 Report to Moderator	Re: gettin a inject, washer sealed up in reply to pplowboy, 03-04-2013 15:17:57   Thats interesting on heating washer up...might try jus see how it works,,,im lookin for a reamer of sort that can put a new sealing surface on it....an yes mightymo the new washer ,didnt survive , 5min run time,, lol....only running on 5 cylinders , lol [Reply]  [No Email]
J. Schwiebert 03-04-2013 18:11:29 209.143.33.147 Report to Moderator	Re: gettin a inject, washer sealed up in reply to pplowboy, 03-04-2013 15:17:57   Back when I worked for an Oliver dealer we had a'reamer' tha we would use to clean out the injecor bore each time we had them out. Since the tip and the end of the injector is the same if you could find one of those it might help you out. J. [Reply]  [No Email]
mightymolinekid 03-04-2013 17:30:35 50.105.132.118 Report to Moderator	Re: gettin a inject, washer sealed up in reply to pplowboy, 03-04-2013 15:17:57   I have a stack of those copper washers, you need to borrow one?? I think I'd just put in a new one.... [Reply]  [No Email]
J.Wondergem 03-04-2013 16:14:30 70.199.115.223 Report to Moderator	Re: gettin a inject, washer sealed up in reply to pplowboy, 03-04-2013 15:17:57   Try heating the copper washer up red hot and drop it a bucket of cold water. That'll puff up the copper so it might hold better. [Reply]  [No Email]