Author	[Modern View]
Blackland Dan 02-07-2013 13:19:17 216.114.61.106 Report to Moderator	Has anyone ever bored a G jug into the water jackets and then resleeve? If so, how far did you take it. How did it work? Thanks, Dan [Reply]   [No Email]
Blackland Dan 02-08-2013 08:10:00 216.114.61.106 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-07-2013 13:19:17   Just what I wanted to hear guys. What is "Hardblocked"? Thanks to all. [Reply]  [No Email]
brentp4455 02-09-2013 10:00:59 70.199.98.22 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-08-2013 08:10:00   hardblock is a substance somewhat similar to cement but NOT the same. You pour it in the water jackets and it solidifies to strengthen the block. its a good idea because blocks can be weakened by large bores. [Reply]  [No Email]
newby puller 02-07-2013 21:16:18 174.253.22.112 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-07-2013 13:19:17   Yes I had a set of 403 g jugs bored to 5.5 sleeved and hard blocked at cornets machine shop turned out nice never been installed. Wanted to stay away from 800 jugs some rules wont let u run 800 stuff so went a different way they are 4 sale [Reply]  [No Email]
mmmmmmmmmmmmmmmmm 02-07-2013 16:40:24 65.55.67.182 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-07-2013 13:19:17   5.75 bore but you better know what your doing. [Reply]  [No Email]
Dieselbear 02-08-2013 03:56:44 50.193.137.17 Report to Moderator	Re: Bore Sleeve? in reply to mmmmmmmmmmmmmmmmm, 02-07-2013 16:40:24   You can take the recast solid blocks to 6 inches [Reply]  [No Email]
mmdiesel 02-07-2013 14:38:08 68.89.245.25 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-07-2013 13:19:17   I have some UB diesel jugs bored to 5.125" I never used them, because I could not find flat top diesel pistons. [Reply]  [No Email]
mightymolinekid 02-07-2013 17:41:05 50.105.141.149 Report to Moderator	Re: Bore Sleeve? in reply to mmdiesel, 02-07-2013 14:38:08   What would you want for those jugs? I may be interested. Shoot me an E-mail if you could. [Reply]  [No Email]
mmdiesel 02-08-2013 13:08:43 68.89.245.25 Report to Moderator	Re: Bore Sleeve? in reply to mightymolinekid, 02-07-2013 17:41:05   I paid about $1000 for the jugs. I might use them sometime. I have lots of "projects" to build. It looked like I would need to grind the crankcase to make the jugs fit. Does that sound right? [Reply]  [No Email]
Blackland Dan 02-07-2013 16:19:00 216.114.61.106 Report to Moderator	Re: Bore Sleeve? in reply to mmdiesel, 02-07-2013 14:38:08   Did you bore into the water jackets and re-sleeve? [Reply]  [No Email]
newby puller 02-08-2013 06:16:49 174.253.22.112 Report to Moderator	Re: Bore Sleeve? in reply to Blackland Dan, 02-07-2013 16:19:00   Yes went into water jackets resleeved filled with hardblock. Run water in the heads not the blocks. Its a little more expensive to do this way but but like I mention was staying away from 800 jugs weight of jugs. Keep it a short jug motor. Just my two cents [Reply]  [No Email]