Author	[Modern View]
51RTU 12-25-2012 16:45:56 69.64.6.114 Report to Moderator	One of the blocks was allowed to freeze and busted. Need block/jug and good carb? What is a fair price for parts machine and fair running tractor. What years would be good for parts? Thanks. [Reply]   [No Email]
Back Forty Bob. 12-30-2012 10:52:39 69.81.130.235 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to 51RTU, 12-25-2012 16:45:56   I have a 1950RTU complete for sale project/parts. 44231zip. $500.00 Can send pics. [Reply]  [No Email]
shinnery 12-29-2012 22:11:50 216.189.193.50 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to 51RTU, 12-25-2012 16:45:56   I normally go to BigIron dot com and type in "m" then click on moline in the search box an all the auctions with moline anywhere in them come up and this one is the third one. But here is the link http://www.bigiron.com/cgi-bin/mnlist.cgi?bigiron6/90134. It is in Wiggins, CO. and the auction ends 1/23/2013. Bryce [Reply]  [No Email]
clyde in colo 12-31-2012 10:09:42 174.51.209.174 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to shinnery, 12-29-2012 22:11:50   Thanks Bryce! I have my RTU stored just a few miles from that tractor. [Reply]  [No Email]
shinnery 12-27-2012 23:04:26 74.84.12.163 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to 51RTU, 12-25-2012 16:45:56   There is a '48 ZTN on BigIron dot com in Colorado. I believe the auction ends in late January. Bryce [Reply]  [No Email]
clyde in colo 12-29-2012 08:18:59 174.51.217.157 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to shinnery, 12-27-2012 23:04:26   You have a link to that listing? I can't seem to find it............... [Reply]  [No Email]
Charlie Bilerx 12-26-2012 23:26:25 64.201.85.187 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to 51RTU, 12-25-2012 16:45:56   51RTU, Any jug from any R or Z tractor will fit just fine. The jugs are all are part #RE(5)101A and the only differences are in the stroke and the piston compression height. Twin City and MM recycled parts forever. Later on, MM updated the part number to #10D1462 with no changes to the part. Any TSX30 or TSX36 one inch carb would be correct for an EE engine. The TSX36 carb showed up after engine number 402201 rolled by, but the only real difference in the carbs is the standard Borg-Warner crap of changing one little part to cheapen something up. In this case, they changed the choke shaft very slightly. Happy hunting. Charlie [Reply]  [No Email]
old 12-25-2012 19:33:53 209.86.226.34 Report to Moderator	Re: What year RTU should I get for parts for 1951 RTU? in reply to 51RTU, 12-25-2012 16:45:56   You have the same problem, with one as I do. I have a RTU that had the exact same thing happen to it but other wise is all there even have a new gasket set with my machine and it is for sale [Reply]  [No Email]