800 CU IN

MINNMO · Dec 18, 2012

DID MOLINE OR OLIVER EVER OFFER THE 800 IN MOTOR AS AN ADVERTISED OPTION IN 2 WHEEL DRIVE TRACTORS, WAS IT AN ADVERTISED OPTION IN 4 WHEEL DRIVES, , WE HAVE A GUY WITH AN 800 IN A G-1000 AND SAYS IT LEGAL, !!!NEED TO KNOW TO SETTLE AN ARGUEMENT THANKS

mmdiesel · Dec 18, 2012

Some of the A4T-1600's left the factory with an 800. The 800 was also dealer installed in some G1000's and 1350's. These would all be the "small" bell 800's.

maj-mm · Dec 18, 2012

It was NOT an "Advertised" option, as per se Sales Literature, but it WAS a Factory, Branch House & Dealer Installed Option in some a few A4T-1600, G1000, & G1050 Tractors, that I am aware of, perhaps others too (back then). MM Built & sold many Tractors & Pieces of machinery that no Sales literature was printed, or has been discovered. However, many of these can be traced & authenticated by other means such as Repair Manuals, Supplements, Dealer Service Bulletins, Service Letters & other MM Company Documentation.

Anonymous-0 · Dec 18, 2012

My advice would be to leave him alone. A stock 504 engine can be made into 1100 cid and still be stock appearing. I know of more than one case were they through out the 800 and then had to deal with a 1000 or more cubes cause they made the guy mad.

jayson-ia · Dec 18, 2012

There are cheaters and losers, you have to chose which one you want to be.....

800 CU IN

MINNMO

Member

mmdiesel

Member

maj-mm

Member

Anonymous-0

Well-known Member

jayson-ia

New User

Similar threads