(800) 853-2651
SHOP NOW

G705 hyd filter part number

R

R Wyler

Member
I bought a Napa 828 filter for my 705 this summer. I am getting very close to firing it up. Anyhow I took the old filter out tonight and I see the filter is much longer and also biggeri n diameter than the Napa 828. I only see one hyd filter listed for the 705. After looking at the archives it looks like my filter is obsolete? Would there be any reason I could not just plumb in an inline filter?
 
I just went to wixfilters dot com and looked up a G705 and it came back as WIX 51828 the NAPA # should be 1828. The G707 calls for the same number. Is this the same as 828? I don't know if this helps any or not.
Bryce
 
Thanks for taking the time to look. Yes that is the same one as the Napa 828. When I went to Napa to get the 828 filter he told me that was the same one as the 51828. I sure need to get this figured out I am anxious to get this thing running.
 
I changed the hyd filter on my 705 a couple of years ago. NAPA said it was discontinued I believe, so I called a AGCO or what ever they are called now, it was discontinued there too, but he shearched other dealers inventories and I did find one, several states away. Maybe a call to Welters will get you a filter.
Brian(MN)
 
From what I found looking in the G705 parts book. Filter part number 10A20301 which subs to W10A20301. I believe this tractor is the same has a Massey 97 and in that parts book it shows Massey part# 1024683M91. Can"t find cross number for Wix. I"ll have to check if these are good numbers yet through Agco.
 
Thanks guys. I will call them tomorrow. If the element is obsolete I think I better figure out how to put an inline filter in.
 
there was a post a wile back on this very thing a guy came up with a way to use that filter check back through the posts it was a while ago
 
Thanks for all the help. Checked today and everyone says obsolete for that filter. I searched the archives but could not find the one for adapting the 1828 filter I am interested in that. I bought an inline filter at Napa and I think I see where I can install it in the return. I am going to take that entire unit apart and cleant all up and flush out the tank. I think this will work out nice.
 
You must log in or register to reply here.

Similar threads

Gambles
IH H oil filter-part deux (boring and long)
Replies
3
Views
293
Gambles
Gambles
R
Keep your radiator clean
Replies
10
Views
425
Case Nutty 1660
C
D
Farmall 450 oil filter
Replies
5
Views
1K
Thack
T
F
allis B presents a new problem
Replies
16
Views
4K
farmer in the (WI) dells
F
Geo-TH,In
Hyd filter on Farmall C
Replies
3
Views
761
Geo-TH,In
Geo-TH,In
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top