Author	[Modern View]
R Wyler 12-15-2012 15:11:35 70.137.13.254 Report to Moderator	I bought a Napa 828 filter for my 705 this summer. I am getting very close to firing it up. Anyhow I took the old filter out tonight and I see the filter is much longer and also biggeri n diameter than the Napa 828. I only see one hyd filter listed for the 705. After looking at the archives it looks like my filter is obsolete? Would there be any reason I could not just plumb in an inline filter? This post was edited by R Wyler at 17:22:59 12/15/12. [Reply]   [No Email]
R Wyler 12-17-2012 11:27:09 70.137.17.63 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   Thanks for all the help. Checked today and everyone says obsolete for that filter. I searched the archives but could not find the one for adapting the 1828 filter I am interested in that. I bought an inline filter at Napa and I think I see where I can install it in the return. I am going to take that entire unit apart and cleant all up and flush out the tank. I think this will work out nice. [Reply]  [No Email]
don in pa. 12-16-2012 17:17:57 67.234.34.107 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   there was a post a wile back on this very thing a guy came up with a way to use that filter check back through the posts it was a while ago [Reply]  [No Email]
R Wyler 12-16-2012 15:47:57 70.137.13.225 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   Thanks guys. I will call them tomorrow. If the element is obsolete I think I better figure out how to put an inline filter in. [Reply]  [No Email]
Wisconsin Cowman 12-16-2012 09:18:09 97.95.49.225 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   From what I found looking in the G705 parts book. Filter part number 10A20301 which subs to W10A20301. I believe this tractor is the same has a Massey 97 and in that parts book it shows Massey part# 1024683M91. Can"t find cross number for Wix. I"ll have to check if these are good numbers yet through Agco. [Reply]  [No Email]
brian(MN) 12-15-2012 20:23:40 67.54.142.163 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   I changed the hyd filter on my 705 a couple of years ago. NAPA said it was discontinued I believe, so I called a AGCO or what ever they are called now, it was discontinued there too, but he shearched other dealers inventories and I did find one, several states away. Maybe a call to Welters will get you a filter. Brian(MN) [Reply]  [No Email]
shinnery 12-15-2012 18:51:13 74.84.13.181 Report to Moderator	Re: G705 hyd filter part number in reply to R Wyler, 12-15-2012 15:11:35   I just went to wixfilters dot com and looked up a G705 and it came back as WIX 51828 the NAPA # should be 1828. The G707 calls for the same number. Is this the same as 828? I don't know if this helps any or not. Bryce [Reply]  [No Email]
R Wyler 12-15-2012 19:01:03 70.137.13.254 Report to Moderator	Re: G705 hyd filter part number in reply to shinnery, 12-15-2012 18:51:13   Thanks for taking the time to look. Yes that is the same one as the Napa 828. When I went to Napa to get the 828 filter he told me that was the same one as the 51828. I sure need to get this figured out I am anxious to get this thing running. [Reply]  [No Email]