(800) 853-2651
SHOP NOW

Minneapolis moline

K

Kyle.H

New User
So i have a oliver g1355 with the 585mm motor how do you get the cam out? It looks like i have to pull the cam gear to get at another plate off, does this sound right? The reason I"m doing this is the key on the crank gear has slop and knock when you crank it. I got the tractor not running and got it going but it is bad every exaust valve hit the pistons for awhile it mushroomed out the tops of the pistons not sure what went first or is someone put it together wrong once and then put it right, any way it is a mess, any help would be great
Thanks Kyle 
 
(quoted from post at 21:19:33 11/07/12) So i have a oliver g1355 with the 585mm motor how do you get the cam out? It looks like i have to pull the cam gear to get at another plate off, does this sound right? The reason I"m doing this is the key on the crank gear has slop and knock when you crank it. I got the tractor not running and got it going but it is bad every exaust valve hit the pistons for awhile it mushroomed out the tops of the pistons not sure what went first or is someone put it together wrong once and then put it right, any way it is a mess, any help would be great
Thanks Kyle 
Click to expand...

Go to agcopartsbooks.com and sign in under "guest". Then search for G-1355. It will give you all the breakdowns of the parts. It is very helpful to see how they are put together.

Dick
 
The cam will come out the front without taking the gear off. If you have the internal pump you have to take it out or if it has the tach drive you will have to take it out. You also have to have the lifters pushed up.
 
You must log in or register to reply here.

Similar threads

F
moline engines
Replies
4
Views
737
Dennis P
Dennis P
U
Stroker U moline
Replies
2
Views
616
ChrisQ
C
I
Minneapolis Moline Museum Collection in Iowa
Replies
3
Views
489
IowaCollector
I
G
201CID diesel ring gap on Ford4500.
Replies
3
Views
155
used red MN
U
M
IH 350U cam shaft gear keyway
Replies
5
Views
269
Bob M
Bob M
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top