| Author |
[Modern View]
|
| 56vicky430
10-27-2012 18:42:59
75.90.148.251
|
I have an opportunity to buy a MM hammermill in a few days. Wondering if there is any interest among the collectors for the piece. I will post links to pictures after I take them tomorrow and find out the model number. It has been stored inside a barn for decades.
|
|
[Reply] [No Email] | |
| don in pa.
10-28-2012 17:25:09
67.234.34.107
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| location location location
|
[Reply] [No Email] | |
| 56vicky430
10-29-2012 14:47:14
98.23.28.1
|
|
Re: MM hammer mill in reply to don in pa., 10-28-2012 17:25:09
|
| Located in Kentucky
|
[Reply] [No Email] | |
| 56vicky430
10-28-2012 14:40:44
75.90.148.251
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| | Pictures. I'd like to have this and fix it up for display but the reality is I have too many projects now. What is it worth to you guys? I can buy it and bring it home provided I get to make some money on it. http://i1215.photobucket.com/albums/cc502/1310monster/400.jpg http://i1215.photobucket.com/albums/cc502/1310monster/395.jpg http://i1215.photobucket.com/albums/cc502/1310monster/397.jpg http://i1215.photobucket.com/albums/cc502/1310monster/396.jpg http://i1215.photobucket.com/albums/cc502/1310monster/399.jpg http://i1215.photobucket.com/albums/cc502/1310monster/398.jpg
|
[Reply] [No Email] | |
| 56vicky430
10-28-2012 14:43:52
75.90.148.251
|
|
Re: MM hammer mill in reply to 56vicky430, 10-28-2012 14:40:44
|
| It is a model D. And the serial number, as best I can tell, is 384068646.
|
[Reply] [No Email] | |
| MMMMMMMMMMMMMMM
10-28-2012 14:47:47
38.123.14.49
|
|
Re: MM hammer mill in reply to 56vicky430, 10-28-2012 14:43:52
|
| That is a corn sheller; not a hammer mill.
|
[Reply] [No Email] | |
| 56vicky430
10-28-2012 14:52:04
75.90.148.251
|
|
Re: MM hammer mill in reply to MMMMMMMMMMMMMMM, 10-28-2012 14:47:47
|
| Thanks for the reply. Shows how much I know about it.
|
[Reply] [No Email] | |
| 71ford100
10-28-2012 11:57:07
98.245.13.143
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| I'd love to have one if it was reasonably close.
|
[Reply] [No Email] | |
| 145 Workhorse
10-28-2012 03:58:59
216.105.208.2
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| Try to save it from the scrappers. It is a piece of agricultural history.
|
[Reply] [No Email] | |
| 36jmm
10-27-2012 21:29:24
74.44.29.252
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| where are you located and is it a 10 or 13 inch
|
[Reply] [No Email] | |
| 56vicky430
10-27-2012 22:02:35
75.90.148.251
|
|
Re: MM hammer mill in reply to 36jmm, 10-27-2012 21:29:24
|
| How do I ID? It has a flat belt pulley. I will have pictures in less than 24 hours.
|
[Reply] [No Email] | |
| kevin moschenrose
10-28-2012 06:40:57
50.122.55.190
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 22:02:35
|
| If it is still intact there will be on this a 3" x 5" alum. tag on it down low near the base of the machine. It will give serial number and model.
|
[Reply] [No Email] | |
| kevin moschenrose
10-27-2012 19:54:09
50.122.55.190
|
|
Re: MM hammer mill in reply to 56vicky430, 10-27-2012 18:42:59
|
| There is always interest if not real far and depending on where at!
|
[Reply] [No Email] | |
