Anonymous-0

Well-known Member
is there any easy way to get the clutch out of the bell housing? i was told if you just pull on it itll come out, but im not having that type of luck. any thoughts? thanks
 
Remove front nut,and grease tube if you want to save it. Put an 8 ft bar through clutch adjusting hole and behind engaging sleeve. Put as much pressure as you can on end of bar and have some hit end of clutch shaft. Caution clutch may fly out and on to the ground quickly.
 
Or you can use a puller and bust everything before Ken tells you how to do it correctly. I held the bar and had the hired man hit the last one. Scared him pretty good when it went pop and FLEW out of there. Jeff
 
Why not just leave the nut on loose and let it catch the clutchbefore it hits the ground? You will still be able to break the taper fit loose.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top