Author	[Modern View]
chris sublett 09-20-2012 09:05:07 170.185.150.19 Report to Moderator	I need a set of fenders for a 445 row crop. any one have a set for sale? [Reply]   [No Email]
Southsider 11-01-2012 18:44:09 68.20.32.79 Report to Moderator	Re: 445 row crop fenders in reply to 450dieselfan, 09-20-2012 09:05:07   These 4 Star fenders have been reposted on Craigslist FWIW... http://grandrapids.craigslist.org/grd/3346159608.html   [Reply]  [No Email]
Southsider 09-25-2012 15:01:15 75.3.138.23 Report to Moderator	Re: 445 row crop fenders in reply to mmdel, 09-20-2012 09:05:07   Chris...I have parts manual books from both tractors. As I mentioned above...the 445 Row Crop and the 4 Star standard rear fenders are both the same part. The number is 11A7396. The 445 Utility uses much smaller rear fenders for smaller rear tires.   [Reply]  [No Email]
chris sublett 09-25-2012 12:01:31 170.185.150.19 Report to Moderator	Re: 445 row crop fenders in reply to chris sublett, 09-20-2012 09:05:07   The parts book on a 445 list a part number for a row crop and a different number for a utility.I will do some research. Thanks   [Reply]  [No Email]
shinnery 09-21-2012 23:12:27 74.84.13.154 Report to Moderator	Re: 445 row crop fenders in reply to chris sublett, 09-20-2012 09:05:07   Well by 1:00 am the link doesn't work, deleted by poster. Bryce   [Reply]  [No Email]
Southsider 09-21-2012 16:33:22 68.20.32.79 Report to Moderator	Re: 445 row crop fenders in reply to Johncat, 09-20-2012 09:05:07   I've never seen (nor read about) an original 445 with crown (4 Star Super/M5) fenders. Strongly doubt they were ever produced that way. It is a matter of definition. My understanding of "crown" fenders is the ones with a distinct horizontal surface on the top...such as on the 4 Star Super and the M5. These were never available on the 445...where the fenders that were just a single curved surface. The ones I referenced in my first reply came off a 4 Star with 38" tires...and would fit the 445...albeit the PG3 color would not match a 445 I don't think. My bro-in-law has listed them on Craigslist...they are his to sell. His listing is incorrect in that the brackets should be included. We used M5 brackets when we mounted the "Super" fenders... http://grandrapids.craigslist.org/grd/3283466027.html This post was edited by Southsider at 16:38:44 09/21/12.   [Reply]  [No Email]
chris sublett 09-21-2012 12:01:19 170.185.150.19 Report to Moderator	Re: 445 row crop fenders in reply to chris sublett, 09-20-2012 09:05:07   I think a row crop 445 with 38" rear tires would have had the crown fenders also. I have some of the fenders off a jetstar 2 but they look like they would be too short.   [Reply]  [No Email]
Southsider 09-20-2012 16:50:37 68.20.32.79 Report to Moderator	Re: 445 row crop fenders in reply to REL, 09-20-2012 09:05:07   I've got a set of fenders we took off our 1959 4 Star when upgrading to "Super" crown fenders. I believe they're identical to the 445 fenders? They're in pretty good shape. We've got them up in Holland, MI. Email me if you're interested dvandenberg at pol.net   [Reply]  [No Email]