Anonymous-0

Well-known Member
I have a 1950 governer in my gtb and I cant get the rps up. I have backed out the adjustment screw but the engine wont rev higher as if the weights are too powerful. Im not sure whats going on. Thanks for your input
 
My 49 GTB was like that too. I pulled out both shafts and levers and replaced the bushings. One shaft was worn quite abit and I built it up and machined it down to new size again. Now its got lots of RPM range.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top