Hey All:
My auxiliary hydraulics don't work and I really need some help. Here's
what I did.
I recently replaced the seal on my pto and I did the following:
Drained all hydraulic fluid
Took PTO shaft out and had new seal put in
Opened left side plate to reinsert coupler gear on PTO shaft
Put back in and reinserted coupler gear
Filled back up with hydraulic oil.
Now, the auxiliary hydraulics don't work.
Today I sort of followed back from the pump bleeding off every connection and I just have no pressure at all at my auxiliary hydraulics. The 3 point and front end loader work fine.
Hopefully someone on here can help me figure this out.
Thanks,
faber
Navasota, Texas
My auxiliary hydraulics don't work and I really need some help. Here's
what I did.
I recently replaced the seal on my pto and I did the following:
Drained all hydraulic fluid
Took PTO shaft out and had new seal put in
Opened left side plate to reinsert coupler gear on PTO shaft
Put back in and reinserted coupler gear
Filled back up with hydraulic oil.
Now, the auxiliary hydraulics don't work.
Today I sort of followed back from the pump bleeding off every connection and I just have no pressure at all at my auxiliary hydraulics. The 3 point and front end loader work fine.
Hopefully someone on here can help me figure this out.
Thanks,
faber
Navasota, Texas