MH50 clutch

2tractors · Aug 24, 2017

Got my new drive clutch from YT installed. Mine had the belleville springs but up top the release fingers were the ones with the wrap around springs.Looks to be a cross between the light and heavy duty model. First time I drove it there seemed to be some chatter going on like it didn't know whether to engage or release I'm thinking maybe some left over glazing on flywheel. Po gave me a box full of springs, fingers, pins, and adjusters but none matched the top cover.Also got top and bottom covers for the HD model and possibly could have put that together but it took a different drive clutch. Again thanks PT.

ptfarmer · Aug 24, 2017

Like when you put new brake pads on a car it will take a bit for them to wear themselves in so they work better. The clutch part number I gave you is what parts book calls for with the serial number of your tractor, some of them will interchange between different serial numbers if you have all the right parts. I have done that before when something needs to back up running as quick as possible.

Brendon Warren · Aug 25, 2017

Good. Now you can help me do one on my 165. It puked oil all over the clutch while I was mowing hay yesterday.

2tractors · Aug 25, 2017

Brendon I might consider helping if I hadn't seen all your spares.lol
PT my 2 standards, one to35,mf50 and mh50 are all dedicated to mow 4 an 1/2 acres. Wife said one tracter for every implement.

Brendon Warren · Aug 25, 2017

This is why I need all them spares. I didn't even unhitch the haybine. I just took the 180. It was all hitched up and ready to go.

MH50 clutch

2tractors

Well-known Member

ptfarmer

Well-known Member

Brendon Warren

Well-known Member

2tractors

Well-known Member

Brendon Warren

Well-known Member

Similar threads