Instrument panel access on MF50

Three bolts on each side come out then that panel with the
key switch pulls out toward the seat. Then you can contort
your way to them from underneath.
 
(quoted from post at 09:22:19 07/17/17) What is the procedure to gain access to the back of the instrument panel? I need to replace two gauges.

I have a MF202 that also looks like it's an impossible job to get at the back of the gauges and tach. You'd think they would have built in an access panel on the back. What a stupid way to build something.
 
Thanks. Figured it out....Sure had some choice words for the engineer who spec'd those Phillips head screws... None came out with a screwdriver, even with the impact screwdriver. will go back with hex head.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top