loose wires in MH 60 concave

riverbend

Well-known Member
I have had this pull type MH model 60 combine for 20 some years and finally decided to relocate the loose wires from the tool box to the concave. The manual says to remove a straw walker and the retainer plate. The parts book appears to show the retainer on the front side.

Has anyone done this job or just know if the wires go in from the front or the back ?

Thanks

Greg
 
The loose wires go in from the back. The pivot bolts for the back of the concave have to be removed to get the wire cover plate off.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top