Replacing the concave on MH combine

riverbend

Well-known Member
The concave on my '58 model 60 has two short bolts at the back and a long one on the front. I'm still working on getting the loose wires installed but it looks like removing the concave will be the easiest way without bending the wires. Other than the nut and the head it does not look like there is any access to the front of the concave.

How hard is it to reinstall the front bolt ? Any tips ?

Thanks

Greg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top