My 1085 was idling in the driveway and just died like it ran out of fuel. Which it may have the fuel gauge does not work. Put fuel in it and new fuel filters. Bled the system the way the book says. But I can not get fuel to the injectors. Bled it three more times. Getting fuel out of all the bleeders. Took the injection pump off and had it rebuilt. They went through it and said it was not bad. Put it in on and still the same thing. Running the lift pump with a bleeder open it feels and pumps good. With all bleeders closed and bled there is resistance for about 5 pumps then it feels like it is not pumping good. Wait 1 minute and it feels good for about 5 pumps again. Still not getting fuel to the injectors. Fuel is everywhere else. Thanks ahead of time.