rstockford
New User
Well after running the tractor with a dirt scoop around the house moving dirt, it had all power. Took it up north and hooked up the 7ft back blade. Had power for about 2 hours then it ran like crap. Had new plugs in it (Autolites) at home, fuel tank filled, carb is good, brand new coil points condenser, wires. So im at a loss of what would cause this. Towards the end, it acted like it was running on one cylinder to make it to the barn. At idle, runs good. While stationary i reved it up and its good. So its when a load is applied or even just driving it around it boggs to almost quit.
Thanks for your help, RYan
Thanks for your help, RYan