For 40 Steering box bearings

I am replacing the bearings in the steering gear box. I ordered part number 1850526M91 and they are too big for
the steering box.I called the place ordered​ from and was told that the bearings where for a MF 50 and that the
Massey Harris 50 and the Ferguson F40 where the same but the didn't have them.Called my local MF Dealer and they
couldn't get them either? The bearings I nee measure 2.40 OD and 1.45 ID.
Thanks for your help and info
Dennis
 
Try looking on the edge of the bearing race. If it hasn't worn off you should see a manufacturer brand and part number that will be different than the massey number. It might say timken MM88610 as an example. That is a wheel bearing but still...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top