rockepg

Member
Hey guys, anyone know where i can get a new set of head bolts for a Z145 engine? Someone previously replaced some of them with regular bolts for whatever reason. Thought about giving ARP a call but that is kinda overkill for this application.
 
For laughs i called arp for a reality check. They were able to put together a kit for me with all 15 bolts and washers for $100 bucks shipped. :)
 
(quoted from post at 11:27:44 02/18/17) For laughs i called arp for a reality check. They were able to put together a kit for me with all 15 bolts and washers for $100 bucks shipped. :)



That's not bad, its impressive that they the bolts, and could make a kit for a Z engine..
 
The guy was good enough to sell me the individual sizes and quantities instead of getting them in packs of 5 like they normally sell. So it worked out :)
 
About 20 years ago I required a set of Conn. Rod Bolts / Cap Screws for a Ferguson TEA-20.(English Engine). I installed hardware from ARP .......Totally satisfied:

Ferguson purists rolled on the floor,kicked and screamed..........:)
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top