What is the procedure for checking a 3 point hitch arms for
slowly dropping. When bush hogging the arms are set at the
right height and a few minutes later you look back and the
arms have lowered.
I suspect it may be the lift piston and rings. Is there a way to
verify before I take it apart? This tractor does have the 2 lever
aux valve for a remote cyl.
slowly dropping. When bush hogging the arms are set at the
right height and a few minutes later you look back and the
arms have lowered.
I suspect it may be the lift piston and rings. Is there a way to
verify before I take it apart? This tractor does have the 2 lever
aux valve for a remote cyl.