MF165 Front Snow Plow

brownth2

New User
I'm looking for a way to mount a front plow on my Massey 165 for snow removal. I've seen posts on here with Ford Universal frames (???) Did MF make anything like this? Would the Ford Universal frame fit a massey? Any ideas on jerry rigging something along these lines? Would it be possible to mount a steel truck plow on the front to one of these? Thoughts? Pictures?
 
found a few mounted on a 165 frame,
but it looks like most were rigged from other tractors

might buy a front end loader and replace the bucket with a blade, that would give you both a loader and a front blade.
a246979.jpg

a246980.jpg

a246982.jpg
 
I've considered the FEL route, but I'd have to add an auxiliary pump to really run it. The pump on my MF is strong but slow. I use it mostly for heavy tillage. At this point an FEL isn't an option.
 
43793.jpg
43794.jpg
43795.jpg
43797.jpg

So the hydraulics once worked a street sweeper, and it is all barely enough when it's cold and the snow gets deep. The plow must have been on a small dump truck, and it all has a tough time, chains all the time... but I would never think of making things smaller than this. This stuff bolted on a 65 would be a step up- I am thinking about it. But the cab on this one is a nice thing to be in when it's windy...
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top