Hi All,
I bought a 3165 loader a few years ago.(I think it's an "industrial" version of a 165).
It had sat a long while & the clutch was rusty & bonded up.
I fixed it up & it runs well.
However,the diff lock ,located on the right side of seat,is not operating.It feels frozen.
I can stand on that pedal,but get no movement at all.
I took the pedal mechanism off & tried to move/turn the actuating shaft....but no luck.
Would this system be rusted/frozen up....or is there another issue here,that required total dismantling?
Luckily,I have the manuals.
Your help is appreciated.
Jim
I bought a 3165 loader a few years ago.(I think it's an "industrial" version of a 165).
It had sat a long while & the clutch was rusty & bonded up.
I fixed it up & it runs well.
However,the diff lock ,located on the right side of seat,is not operating.It feels frozen.
I can stand on that pedal,but get no movement at all.
I took the pedal mechanism off & tried to move/turn the actuating shaft....but no luck.
Would this system be rusted/frozen up....or is there another issue here,that required total dismantling?
Luckily,I have the manuals.
Your help is appreciated.
Jim