(800) 853-2651
SHOP NOW

MF 275 hydraulic selector valve??

C

Cullbuck

New User
I am all confused as to what a hydraulic selector valve (that bolts on top of the housing just under the seat) is supposed to do. My MF 275 does not currently have one of these and my loader control valve is connected to one set of the rear hydraulic outlets and the corresponding control lever must be tied forward for the loader to work. Do I need to get one of these selector valves in order to have the loader to be operational all the time and free up the rear hydraulic outlets?
If so, how are these valves supposed to be plumbed or where are the hoses supposed to connect??
These Massey's are confusing to a JD man....

Thanks in advance for any help.
 
If the tractor has the TWO spool valve then a separate two spool loader valve is not needed, loader lift and tilt cylinders can be hooked directly to the tractor. If the tractor has the SINGLE spool valve and it feeds the two spool loader valve that's why it needs the lever held on. You don't need the selector valve as your tractor already has the auxiliary pump inside. The selector valve works off the separate three point pump. Early MF tractors did not have the auxiliary pump and external spool valve option, and then the selector valve was used for loader use.
 
You must log in or register to reply here.

Similar threads

J
Add hydraulic remote for quik attach on MF 20C
Replies
10
Views
364
MKinON
M
H
How are the hydraulics on the 880 Selectamatic supposed to work?
Replies
5
Views
221
RGMartin
R
D
Mf top cover remote valve?
Replies
15
Views
952
Jim.ME
J
K
Massey 31 Industrial Hydraulic/3 Point Questions
2
Replies
22
Views
4K
Kmfl
K
S
300 U loader valve ?
Replies
15
Views
322
Shelbygt
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top