1105 draft controls

4240 Turbo · Aug 27, 2016

Anyone have apdf of the1105/1135 op manual that explains some of the menagerie of the draft sensing adjustments, I have the lever in the cab figured I think, and the turn knob I believe, My next considerations are the location of the top link mounting bar on the tractor, has 2 sets of holes, the upper and the lower, and I also notice a pin and atleast 3 locations in the linkage, what do all of these affect, and where do we locate each one for different combos?

Roy in UK · Aug 28, 2016

Hi, We had an 1100 , I believe the top link arrangement was similar to your tractor. The position of the top link and that pin and 3 hole affair all affect the sensitivity of the draft control. To be honest you its a case of experimenting with different positions depending on the implement you are using. We bought a big cultivator for her and the first time we tried it out it seemed as if the whole tractor was going to shake itself to bits! The top link literally shivered and shaked. (We had never had any problems before using a fully mounted 5 furrow plough) We found that if we moved the pin into a different hole it cured the problem.

4240 Turbo · Aug 28, 2016

thanks, I was hoping for a manual to atleast establish just how many adjustments there are.

ptfarmer · Aug 28, 2016

A operators manual for the tractor may have more information. AGCO part number 1448244M4 http://www.agcopubs.com/massey_ferguson

4240 Turbo · Aug 29, 2016

Thanks I thought someone might upload for me, like I do if I have a manual that someone else can benefit from.

1105 draft controls

4240 Turbo

Member

Roy in UK

Well-known Member

4240 Turbo

Member

ptfarmer

Well-known Member

4240 Turbo

Member

Similar threads