so I've got a industrial 20 and its got a 3 cyl perkins gas. It had a nasty oil leak and less than stellar oil pressure so I pulled the engine and sure enough the oil galley plug was leaking. SO I've got a new plug but I'm not really sure how to get the old one out. slide hammer? it looks as if it was driven in from the front of the engine or the plug was driven in backwards. I'm going to include 2 pictures.
I guess you really can't see the arrow really well in the second picture.. it's down by that silver stripe which is the back side of the arrow I drew
[/img]
I guess you really can't see the arrow really well in the second picture.. it's down by that silver stripe which is the back side of the arrow I drew
[/img]