MF40 Transmission & Brakes

Lakey · May 19, 2016

G/Day folks
I`m Lakey from Narooma NSW Australia.

I have a MF40 back o loader the Motor and hydraulics all work fine the transmission seems to be in trouble?
I only have a Operator Manual and I`m not a mechanic.

1- My old Mf40 Auto has No forward or reverse happening The transmission oil is good and linkages seem OK.

2- and I can`t find information on what oil / brake fluid? the Brake slave cylinder takes.

look forward to any advice.
Regards lakey.

MKinON · May 21, 2016

If this is an industrial MF40 like ours (early 70's), the brakes are mechanical. Re trans, did it lose drive suddenly while in motion, or ...? If the first is the answer, I believe it has a shear coupling between the trans
and diff like our 35. Could be it broke, or the pin fell out and it slid forward. Maybe a clogged filter could cause it to stop moving, or, at least be sluggish. One really needs to know more about how the problem
arose.

MF40 Transmission & Brakes

Lakey

New User

MKinON

Member

Similar threads