I am trying to wire in a new ignition switch purchased from MF. My old switch which did not work had four numbered posts. The #2 post was broken ff. The new switch has three posts on the back, however the first post has a smaller post attached to it. They are numbered 1,2,3, and the smaller post is not numbered. Does anyone know what these numbers relate to? I found an old post with a detailed wiring diagram, however that switch only had three posts and they were labeled S,H,and L.
The previous owner of this tractor bypassed the switch and added a push button to start it. Glow plug was never even hooked up. Any help would be appreciated.
The previous owner of this tractor bypassed the switch and added a push button to start it. Glow plug was never even hooked up. Any help would be appreciated.