James Babcock
Member
This 180 has a high serial #, and this box does not match the diagrams in the IT manual, official MF shop manual, nor the online diagram at agco. Makes me wonder if they switched boxes near the end of the run, or if this box is off some other tractor?? Anyhow I need advice on removing the top cover. I can move it fairly easily about 1/4 inch, then it won't move anymore, even when I drive a wedge in both sides. I smacked it pretty hard with punches, too. Any ideas to try next? The seal needs replaced (#8 in the diagram)
Differences in my box and the diagram include parts #1 and 21, plus #9.
Thanks in advance!
Differences in my box and the diagram include parts #1 and 21, plus #9.
Thanks in advance!