Massey Harris 333 Engine casting numbers

I have a 57 Massey Harris 333 that I believe has been re-powered with a different engine.
The casting number starts with E400, but I do not know if that number was used on the E208 native to the 333 or if it is a 201 used on the 33.
There is also a casting number C 29 T below the number. I cannot find a tag on the engine to give me any more info.

Any help with tracking down what engine is in this is greatly appreciated.
 
Look at the timing cover, the 201 and 208 both had the governor shaft vertical. The 260 and 277 gas had the shaft horizontal in the cover. Which do you have?
 
E400 is also used for the 208 engines. On the manifold side of the engine block towards the upper-left corner is a flat spot where the ID is stamped in the block. You should see the 201 or 208 number.
 
after it got dark I was able to take a picture with the flash to reveal A208G on the flat spot below the head.
So I assume that it is a E208.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top