Can anyone tell me if fuel is suppose to come out the top of a diesel injector with the top cap off. The reason I asked. I am restoring my MF 65.
I started it for the first time yesterday. It started ok with a little started fluid. It ran nice but smoked a lot. I know it was going to smoke just for
being started for the first time.
But after about 7 or 8 min of running the smoke cleared up. Start to see leaks here and there. But I notice that
the injector was leaking. So I remove the top cap of the injector and fuel was coming out the top of the adjusting screw. I did not know if that is
suppose to be that way or not. The tractor was still running fine. I did not hear any skips or ruff running of the tractor. It responded to up down
throttle nice and quickly. So I just tighten the top cap of the injector. But all the injectors were doing this. So is the ok or I have a problem.
I started it for the first time yesterday. It started ok with a little started fluid. It ran nice but smoked a lot. I know it was going to smoke just for
being started for the first time.
But after about 7 or 8 min of running the smoke cleared up. Start to see leaks here and there. But I notice that
the injector was leaking. So I remove the top cap of the injector and fuel was coming out the top of the adjusting screw. I did not know if that is
suppose to be that way or not. The tractor was still running fine. I did not hear any skips or ruff running of the tractor. It responded to up down
throttle nice and quickly. So I just tighten the top cap of the injector. But all the injectors were doing this. So is the ok or I have a problem.