checking oil on 30 industrial loader??

dick benson · Mar 2, 2015

I dumped the yellow milky oil out of the loader, now I need to refill. How do you check the oil level on a Massey 30 industrial loader. The loader is not a Davis, I beleive it is a massey 32? Dick

blue water massey · Mar 2, 2015

on the right hand upright where your hand controls are the vent cap is where you fill the loader up
when you remove the cap or the whole vent to refill the loader there was from the factory a ball chain with a dip stick attached to it
problem is they almost always broke off and the dipstick will be down on the bottom of the tank
fill with hydraulic oil that meets m
M-1110 specs 6 us gals for loader only 12 with backhoe
on my tlb with an MF32 loader I've always put in 6 gals for a filter and oil change
full level should be just above the top of the filter housing

dick benson · Mar 3, 2015

Thanks. The dipstick was on the vent cap. 5 gal put it a little over full before I started it. New filter probably took a little. Dick, OR.

checking oil on 30 industrial loader??

dick benson

Member

blue water massey

Well-known Member

dick benson

Member

Similar threads