Determined
Well-known Member
Going to look at a friends 1135 next week.
He claims one valve is noisy and wants me to set them for him.
Anybody off hand know the clearance intake/exhaust, hot/cold
The motor was supposed to have been redone about 6 years ago and he says it has made noise ever since.
The tractor has basically been parked since the motor was done and only has a few hours on it.
I am not holding my breath that all it needs is setting but time will tell.
Cam, bent pushrod, broken spring, sticking guide, broken rocker arm ???
Are any of these common problems on this motor?
He claims one valve is noisy and wants me to set them for him.
Anybody off hand know the clearance intake/exhaust, hot/cold
The motor was supposed to have been redone about 6 years ago and he says it has made noise ever since.
The tractor has basically been parked since the motor was done and only has a few hours on it.
I am not holding my breath that all it needs is setting but time will tell.
Cam, bent pushrod, broken spring, sticking guide, broken rocker arm ???
Are any of these common problems on this motor?