wiring 202 M F Work bull

growler4140 · Feb 13, 2015

I am looking for a wiring diagram for a 1962 202 work bull industrial. If someone can point me in the right direction it would be great. Thanks

RuralTowner · Mar 5, 2016

First...which wiring layout?

If its the charging circuitry...on my own (before I put gauges on since the OEMs were faceless scrap) I wasn't sure if it was charging so I pulled the generator and replaced with a basic alternator from a 60's Dodge bus. Charge post is run straight to (+) on battery while the Field and is run to a basic (points type) regulator that is also connected to the key.
OFC this meant I no longer could hook up a tach...or at least use the gear-driven one...not that the rust filled hunk worked anyhow. Might install an electric one later.
A GM 1-wire would work just as well but in my instance I did it on the cheap and used what I already had.

AGCOPARTSBOOK.com might show one. Haven't checked myself though.

Somewhere I have a couple manuals for my own 202 which is a 63. If I can get my scanner to work I'll try to get the pages for you. I know the books should probably give the wiring layout for the gen-setup.

RuralTowner · Mar 5, 2016

Whoa old topic...didn't see the date. Somehow page I was on had this near top of list.

Tony in Mass. · Mar 6, 2016

Agh, what's 13 months amongst friends eh?
Haven't heard from you in a long time. We thought the gila monsters gotcha.

RuralTowner · Mar 6, 2016

None of those around here...worst to worry about are rattle snakes. Temps warming up so will no doubt have them out again soon.

wiring 202 M F Work bull

growler4140

New User

RuralTowner

Member

RuralTowner

Member

Tony in Mass.

Well-known Member

RuralTowner

Member

Similar threads