44-6

smokeshow · Feb 3, 2015

I have a few questions for you massey harris people. I need a parts for my 44-6. Bellhousing, clutch, flywheel any help would be great. Also would any of the parts off a 44-4 work? Thanks

Dieseltech · Feb 3, 2015

44-4 flywheel and bell housing are different, think pressure plate and clutch disc are the same as the 44-6, at least mine does.

smokeshow · Feb 3, 2015

thank you dieseltech. Also would you happen to know if the 44-6 hood and grill are different than the 44?

Dieseltech · Feb 3, 2015

There are two grills to fit 30, 44-4, and 44-6. Difference is the hydraulic hole filler plug if needed.

chris kessel · Feb 3, 2015

hood is different. grille is the same

smokeshow · Feb 3, 2015

Chris, are the hoods the same length?

Bob H from Missouri · Feb 4, 2015

Where are you located? I might have all of the parts you are needing. I have a 44-6 that I have been thinking about parting out in SW Missouri. Email me your phone number and I will call.

Bob

smokeshow · Feb 4, 2015

I'm located in southwestern Indiana. Evansville to be exact. I might be interested in your parts. Thanks

centash · Feb 4, 2015

30, 33 44 and 55 hoods are all the same length, just the holes are in different locations

Ben

Goldsburg · Feb 6, 2015

The side profile of the 44-6 hood is also different from the 44. It appears to be a "corporate" standard for Massey that the flathead engine tractors had a lower profile for the "arch" on the side of the hood.

Regards,

Goldsburg

44-6

smokeshow

Member

Dieseltech

Well-known Member

smokeshow

Member

Dieseltech

Well-known Member

chris kessel

New User

smokeshow

Member

Bob H from Missouri

Member

smokeshow

Member

centash

Well-known Member

Goldsburg

Member

Similar threads