theoldfart
New User
My 1085 starts up, runs for a few seconds and then shuts down. Bleeding the injectors will get it going again and then it is OK until it sits for more than an hour or so.
There is fuel seeping from the throttle and fuel cutoff shafts on the top of the injector pump only when running.
I have seen posts in this list archives that discuss replacing seals in the top of the pump. Where can I get this seal kit and does it have instructions?
TIA
There is fuel seeping from the throttle and fuel cutoff shafts on the top of the injector pump only when running.
I have seen posts in this list archives that discuss replacing seals in the top of the pump. Where can I get this seal kit and does it have instructions?
TIA