Our 2705 started shifting funny (driver said slow dragged out shifts) in the spring so we parked it. I pulled it into the shop and am finally getting around to checking it out now.
I checked the transmission pressures as described in the manual. Manual says port 5 at 300 psi in "low", port 4 at 300 psi in "intermediate", and port 6 at 300 psi in "high".
"Low" and "high" appear to be in spec except for both of them port 4 is also at 60 psi.
In "intermediate" all 3 gauges are at 0 psi.
Manual says "malfunction of shift valve or clutch pack is indicated".
Any body know of any ways to narrow it down a little more?
I checked the transmission pressures as described in the manual. Manual says port 5 at 300 psi in "low", port 4 at 300 psi in "intermediate", and port 6 at 300 psi in "high".
"Low" and "high" appear to be in spec except for both of them port 4 is also at 60 psi.
In "intermediate" all 3 gauges are at 0 psi.
Manual says "malfunction of shift valve or clutch pack is indicated".
Any body know of any ways to narrow it down a little more?