MF 65 wrong front end part#

Boss Hog · Oct 12, 2014

I asked a while back about a part for the front end of an MF 65. Someone gave me the number: 182519M91.

But as you can see below, it doesn't match up with the old part:

I'm thinking the correct number should be 192863M1?

http://www.yesterdaystractors.com/Massey-Ferguson-65_Tied-Rod-End_192863M1.html

Don't know where to look for a serial number on the tractor. I found a plate on the left side of the engine with the number 29391 on it. That doesn't seem to be a serial number.

Can anyone help me out?

Brendon Warren · Oct 12, 2014

The serial number should be on left hand side of the
dash or on the right side of the tractor just above
the voltage regulator. Sorry I don't know the part
number.

hymie2lt · Oct 12, 2014

Hello
I have a NOS 192863m1 tie rod end. If you shoot me an e-mail at bottom right (Send E-mail), I can send you a photo and some measurements to compare to your old one?
Wayne

petebac · Oct 13, 2014

acording to agco the part num is 192863m1

ptfarmer · Oct 13, 2014

That would be me, sorry about that. Your model 65 is a 1962-1965 year model (serial # 692932 and up). the 1957-1961 65 (pre serial # 692932) used the part number 186077M92. These things can be tricky to get the right part number for without a serial number sometimes. But at least now you know have a better idea of what the year model it could be.

MF 65 wrong front end part#

Boss Hog

Member

Brendon Warren

Well-known Member

hymie2lt

Member

petebac

New User

ptfarmer

Well-known Member

Similar threads