Massey Ferguson super 90 engine overhaul kit

Good luck finding one. I have been rebuilding with used pistons and sleeves, for quite some time now.
Rings are still available, and so are the rod and main bearings.
Valve guides are also obsolete.
Get your engine re-builder to check your pistons and sleeves out. Pistons may have some wear, and the sleeves should show no wear at all.
Wayne
 
I found mine one at a time at Mabie Bros. A sleeve was like 280 and it came from the UK in an old box. I don't think a complete kit exists!
 
Are we talking about a Perkins diesel Super 90 or a Continental gas 90? My brother-in-law has 3 90s. He says he cannot get rod or main bearings for the Continental gas engine in one of them. If you know any sources please pass on to me. Also, any source for the power-steering & power clutch supply pump mounted in side of transmission casing on right side approximately below brake pedals? Is it possible to rebuild these yourself. I understand they are made by Cessna which certainly is still in business, but that parts are nearly impossible.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top