MF 65 steering AGAIN!

Ron/PA · Apr 14, 2014

Folks, I know it's probably getting old but I'm making progress. Weather and work have mixed well and I could get the 65 out again to address the power steering problem.

I disconnected the linkage from the steering box and the box locks up tighter than a drum with no load on it.

Up until now, I was about to put it on CL to swap for an 8N. Now I'm finally getting somewhere and it seems searches say I have no where to go.

Where do I start looking for parts to rebuild it or even a decent replacement?

Any help will be much appreciated.

Thanks. Ron

samn40 · Apr 14, 2014

Look on the right side of your steering box....You will see a screw
and locknut. slacken the locknut and screw the setscrew out a turn
and see if that helps.....This screw is to take slackness out of the
steering, but some times it is adjusted too tight! The box is not
difficult to rebuild...........Sam

MF 65 steering AGAIN!

Ron/PA

Well-known Member

samn40

Well-known Member

Similar threads