You probably have an independent pto, that and the 3 point rock shaft not working at the same time shows there may be a problem with the hydraulic pump - you got a manual?
 
Sounds like you need to set your clutch ? setting is done through the inspection plate underneath. (3 different setting points!) About the thickness of a standard hand held hacksaw blade is good. Which lever are you using on the 3 point? The outer lever is draft setting, the inner one position control. It needs to be set in the raised position to work the draft lever, likewise the draft lever needs to be fully raised for the position lever to work correctly............Sam
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top