for Dan NY

trac · Jan 27, 2014

here's a few photos of the plow i had all the scrap metal so it only cost 100. bucks for the hydraulic lines need to put two more on for the angle pistons.

trac · Jan 27, 2014

(quoted from post at 20:01:16 01/27/14)

here's a few photos of the plow i had all the scrap metal so it only cost 100. bucks for the hydraulic lines need to put two more on for the angle pistons.

just wanted to add 2 more pics

Dan S (NY) · Jan 28, 2014

Thanks for the pictures, I will save them in my files. Looks like a handy setup. I have an old MF38 loader that I was thinking about taking the forks off and adding a plow blade. I currently use a 6 foot 3 point snowblower for the deep stuff but usually use a back blade to scrape things down later to clean up paved areas. It would be nice someday to not do that in reverse all the time.

Dan

for Dan NY

trac

Member

trac

Member

Dan S (NY)

Well-known Member

Similar threads