MF35 Steering Bearings and Cups

Kevin S SC · Oct 9, 2013

I purchased the steering shaft bearing and cup assembly from this site. Now how do I get the old cups out? The upper I've got started and can probably get it, but the lower I'm not sure about. I have most tools to include a press but no acetylene torch. I can get access to one if needed. It is manual steering. Thanks for any help. Kevin

Masseynut(Australia) · Oct 11, 2013

An old trick with tight bearing cups in housings, get the stick welder out, set at around 110amps and weld a "bead" around the bearing surface of the cup.
Now let the cup cool sufficiently, and they will nearly always fall out in your hand...

Kevin S SC · Oct 11, 2013

Thanks I may try that. The bottom one will be hard to get to and if it don't work Ill be stuck, so I may leave the bottom one alone. It aint too bad.

MF35 Steering Bearings and Cups

Kevin S SC

Member

Masseynut(Australia)

Member

Kevin S SC

Member

Similar threads