Massey Harris 30

Bill1952 · Apr 29, 2013

Need a little help.
I recently bought a 1951 Massey Harris 30.
The hydraulic fluid reservoir sits in front of the radiator. The ears on the cap/dipstick are broken, so the cap won"t tighen and seal allowing hydraulic fluid to blow out and make a mess. Where can I find another cap/dipstick?

hymie2lt · Apr 29, 2013

Hi Bill
I dont know if this is the right part number or not? Agco parts books shows under 20, 30, 44 hydraulic equipment the part number 763183m91 for the oil tank cap. Googling the number shows many hits, but for an air cleaner cap???
Have a look maybe you can figure this out?
Wayne

Tom Dold · May 1, 2013

Bill1952

763183M91 is the right part #. It is the same for 30,33 and 44.

Tom Dold
Dold Implement
201 S. Main St.
PO Box 70
Howard, SD 57349
605-772-4541
[email protected]

missouri massey man · May 2, 2013

The reservoir is on the return side and subjected to no real pressure so it really shouldn't be blowing out and spilling unless you've gotten it way too full and sloshing around at the top. Should be a mark on the dipstick..... I've got a couple with loose and floppy caps and lose no oil.

Bill 1952 · May 7, 2013

You're right. It is over full. Also real milky looking. Maybe contaminated with water ??
Thanks.

Bill 1952 · May 7, 2013

Tom, Is this something that I could buy thru my local Massey Ferguson dealership?

Tom Dold · May 10, 2013

Bill
Unfortunatly, the parts number is obsolete.

Tom

Massey Harris 30

Bill1952

New User

hymie2lt

Member

Tom Dold

Member

missouri massey man

Member

Bill 1952

New User

Bill 1952

New User

Tom Dold

Member

Similar threads