Author	[Modern View]
1850Dpuller 02-12-2013 07:53:18 70.240.147.168 Report to Moderator	What is the timing before top dead center a MF 1135 is timed at? And how many degrees of timing can be changed by moveing the pump body or the timing gear? Thanks [Reply]   [No Email]
Dieseltech 02-12-2013 15:45:56 199.16.223.2 Report to Moderator	Re: MF 1135 injection pump timing in reply to 1850Dpuller, 02-12-2013 07:53:18   Timing depends on which pump you have, early no advance pumps were 28 BTDC, later advance models were less. Timing can be changed by shifting pump housing. Gear adjustment is for proper drive hub notch location, can change timing here too, but not the correct way. Need to know what pump # is to see how it is built.   [Reply]  [No Email]
1850Dpuller 02-13-2013 17:39:01 216.74.220.150 Report to Moderator	Re: MF 1135 injection pump timing in reply to Dieseltech, 02-12-2013 15:45:56   I have some questions I would like to talk to you over the phone. Could I call you sometime? If you are alright with this please email me your number and a time that would be best to call. My email address is ethan_oliver91@hotmail.com   [Reply]  [No Email]
Dieseltech 02-13-2013 21:22:04 199.16.223.2 Report to Moderator	Re: MF 1135 injection pump timing in reply to 1850Dpuller, 02-13-2013 17:39:01   Sure, call after 7 PM IN time is best. 574 eight nine three 4172, in case E-mail fails.   [Reply]  [No Email]
Dieseltech 02-17-2013 14:21:01 199.16.223.2 Report to Moderator	Re: MF 1135 injection pump timing in reply to Dieseltech, 02-13-2013 21:22:04   Tuesdays and thursday evenings are the best time to call.   [Reply]  [No Email]
1850Dpuller 02-18-2013 13:24:27 70.240.147.168 Report to Moderator	Re: MF 1135 injection pump timing in reply to Dieseltech, 02-17-2013 14:21:01   Ok I will try then. Thanks   [Reply]  [No Email]