(800) 853-2651
SHOP NOW

Oil and hydraulic fluids for 67 MF135

D

dw1973

Member
I need help with the oil fill hole location and the hydraulic fill hole locations for a Continental Z145 engine MF135. Also, capacities for both? Thanks, DW
 
Mine a 150, same engine. Motor oil fill is forward left side sitting on tractor. It has a "T" handle, loosen counter clockwise, pull it out, 6 quarts.

Hyd oil, fill is large square head plug next to shifter, thinking 8 gal in the 150. I used permi-tran from dealer. Hyd and differential are common cavity.
 
i used shell rotella 15w40 in the motor as it still has the zinc additive, for long motor life.

but as tom said,

buy your trans/hyd fluid from the dealer,
you do not want to buy some cheap off the wall oil and ruin your hyd system or trans.

does your model have a trans/hyd sump filter that can be changed.
 
Thanks - not sure about the trans/hyd sump filter - location? I have the Deluxe 135 model with Z145 Cont. gas engine.
 
Your filter is in the belly of the beast. If you DO NOT have IPTO, remove left cover with the pto lever to get to filter. If you have IPTO, lift cover must come off.

By the way, there are two drain plugs for Hyd oil to get it all out.
 
You must log in or register to reply here.

Similar threads

R
MF 2210
Replies
4
Views
132
rebelranger
R
5
MF135 bad rear wheels, can it be salvaged from the weeds?
Replies
5
Views
376
5000gasser
5
T
Rocker Arms
Replies
5
Views
443
Tom from Buckeye Lake
T
K
spark plugs for perkins gas
Replies
5
Views
533
keotie
K
B
MF135 fuel gauge wiring question
Replies
19
Views
360
Bill Knecht
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top