|
| |
| Massey Harris & Massey Ferguson Tractors Discussion Forum |
Topic: MF 50 steering wheel and turning adjustments
[Return to Forum]
| Author |
[Modern View]
|
| Jim Gorter
02-04-2013 12:30:30
76.205.222.73
|
Got the MF50 running on Sat. Needs a new steering wheel. Deep dishtype with power steering. also machine turns sharp to the left,shallow to the right. Any way to readjust the turning limits? Thanks, Jim.
|
|
|
| Jim Gorter
02-05-2013 17:47:20
76.205.222.73
|
|
Re: MF 50 steering wheel and turning adjustments in reply to Jim Gorter, 02-04-2013 12:30:30
|
|
| Trac and miner, Thanks for the info. I will try to reset the pitman arm and see if the turning angles even out. I think the steering was modified so the machine could make sharper left turns in the avocado orchard where it worked. On the splined shaft, are there allignment splines or just same splines on diameter of shaft? Thanks, Jim.
|
|
|
| miner09
02-05-2013 10:40:36
70.196.32.84
|
|
Re: MF 50 steering wheel and turning adjustments in reply to Jim Gorter, 02-04-2013 12:30:30
|
|
| The arm coming off steering box has to be lined up with marks on gear box. Clean if you don't see marks(line).
|
|
|
| Jim Gorter
02-05-2013 09:31:12
76.205.222.73
|
|
Re: MF 50 steering wheel and turning adjustments in reply to Jim Gorter, 02-04-2013 12:30:30
|
|
| Trac, Thanks for the reply. I have a Owners manual but it doesnt go that deep. I will look closer at the front control arm to see if its been adjusted too much one way. JIm.
|
|
|
| Trac
02-05-2013 10:29:26
71.48.106.99
|
|
Re: MF 50 steering wheel and turning adjustments in reply to Jim Gorter, 02-05-2013 09:31:12
|
|
| Jim just look at the pitman arm thats on the steering box with the wheels strait that arm needs to be strait up and down if not that arm must be a few teeth off.
|
|
|
| Trac
02-05-2013 04:55:46
71.48.106.99
|
|
Re: MF 50 steering wheel and turning adjustments in reply to Jim Gorter, 02-04-2013 12:30:30
|
|
| Someone must of had your steering apart in the past and didn't get it aligned right there is a worm drive or (cork screw)That moves the pitman arm you may get lucky and just have to remove that to get it aligned do you have the manual for that model it might help.
|
|
|
[Options]
[Printer Friendly]
[Return to Forum]
[Add a Reply]
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2013 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters |
About this site - Yesterday's Tractors is your one-stop source for antique tractors. If you are interested in older tractors you've come to the right place! Join more than 275,000 other classic tractor enthusiasts from all over the globe. We have many resources for antique tractor enthusiasts available including photos, classified ads, more than 24 tractor discussion forums, a show guide, values, specs and much more. Bookmark this site and come back often. Thanks for stopping by! Feel free to use our feedback form to send us your comments, suggestions and ideas.
|
|
|
