Author	[Modern View]
matt p 02-01-2013 07:29:28 69.31.197.148 Report to Moderator	I"ve got a small leak in power steering hose,it was rubbing against starter.Can I put a splice in it or is their a repair kit? Can I go to a hydraulic shop and get another hose or does it have come from Massey thanks [Reply]   [No Email]
Tom from Buckeye Lake 02-01-2013 14:47:52 69.160.178.244 Report to Moderator	Re: power steering 202 in reply to matt p, 02-01-2013 07:29:28   I had a hydraulic shop make new lines for my 150. 1/3 the cost of OEM. The fittings were inverted flair, like auto brake and fuel lines. [Reply]  [No Email]
matt p 02-01-2013 08:44:38 69.31.197.148 Report to Moderator	Re: power steering 202 in reply to matt p, 02-01-2013 07:29:28   The hose is the one that comes from the bottom of the power steering pump going to the steering under the dash ,what kind of pressure does this run at? [Reply]  [No Email]
dzus 02-01-2013 08:04:12 97.73.64.148 Report to Moderator	Re: power steering 202 in reply to matt p, 02-01-2013 07:29:28   Are you talking about the lines going to the cylinder? They are pressure hoses. Too much pressure for a hose clamp type splice. They are a tight bend where they attach to cylinder. I doubt if a hose shop could duplicate exactly. We bought new ones from Agco a couple of years ago. They were available at that time. Not cheap but they fit correctly. [Reply]  [No Email]
Inno 02-01-2013 07:35:04 174.89.113.108 Report to Moderator	Re: power steering 202 in reply to matt p, 02-01-2013 07:29:28   Not sure that the fittings are available to just get a hose made up, you might have to try and splice. There is a 202 power steering post here from last week or so, have a look at it. There is something unique about the angle of the fittings. Certainly the best way to go would be a new hose but I'm not sure that is an option. This post was edited by Inno at 07:36:10 02/01/13. [Reply]  [No Email]